Skip to main content
Contents
Dark Mode Prev Up Next
\(\newcommand{\markedPivot}[1]{\boxed{#1}}
\newcommand{\IR}{\mathbb{R}}
\newcommand{\IC}{\mathbb{C}}
\renewcommand{\P}{\mathcal{P}}
\renewcommand{\Im}{\operatorname{Im}}
\newcommand{\RREF}{\operatorname{RREF}}
\newcommand{\vspan}{\operatorname{span}}
\newcommand{\setList}[1]{\left\{#1\right\}}
\newcommand{\setBuilder}[2]{\left\{#1\,\middle|\,#2\right\}}
\newcommand{\unknown}{\,{\color{gray}?}\,}
\newcommand{\drawtruss}[2][1]{
\begin{tikzpicture}[scale=#1, every node/.style={scale=#1}]
\draw (0,0) node[left,magenta]{C} --
(1,1.71) node[left,magenta]{A} --
(2,0) node[above,magenta]{D} -- cycle;
\draw (2,0) --
(3,1.71) node[right,magenta]{B} --
(1,1.71) -- cycle;
\draw (3,1.71) -- (4,0) node[right,magenta]{E} -- (2,0) -- cycle;
\draw[blue] (0,0) -- (0.25,-0.425) -- (-0.25,-0.425) -- cycle;
\draw[blue] (4,0) -- (4.25,-0.425) -- (3.75,-0.425) -- cycle;
\draw[thick,red,->] (2,0) -- (2,-0.75);
#2
\end{tikzpicture}
}
\newcommand{\trussNormalForces}{
\draw [thick, blue,->] (0,0) -- (0.5,0.5);
\draw [thick, blue,->] (4,0) -- (3.5,0.5);
}
\newcommand{\trussCompletion}{
\trussNormalForces
\draw [thick, magenta,<->] (0.4,0.684) -- (0.6,1.026);
\draw [thick, magenta,<->] (3.4,1.026) -- (3.6,0.684);
\draw [thick, magenta,<->] (1.8,1.71) -- (2.2,1.71);
\draw [thick, magenta,->] (1.6,0.684) -- (1.5,0.855);
\draw [thick, magenta,<-] (1.5,0.855) -- (1.4,1.026);
\draw [thick, magenta,->] (2.4,0.684) -- (2.5,0.855);
\draw [thick, magenta,<-] (2.5,0.855) -- (2.6,1.026);
}
\newcommand{\trussCForces}{
\draw [thick, blue,->] (0,0) -- (0.5,0.5);
\draw [thick, magenta,->] (0,0) -- (0.4,0.684);
\draw [thick, magenta,->] (0,0) -- (0.5,0);
}
\newcommand{\trussStrutVariables}{
\node[above] at (2,1.71) {\(x_1\)};
\node[left] at (0.5,0.866) {\(x_2\)};
\node[left] at (1.5,0.866) {\(x_3\)};
\node[right] at (2.5,0.866) {\(x_4\)};
\node[right] at (3.5,0.866) {\(x_5\)};
\node[below] at (1,0) {\(x_6\)};
\node[below] at (3,0) {\(x_7\)};
}
\newcommand{\N}{\mathbb N}
\newcommand{\Z}{\mathbb Z}
\newcommand{\Q}{\mathbb Q}
\newcommand{\R}{\mathbb R}
\DeclareMathOperator{\arcsec}{arcsec}
\DeclareMathOperator{\arccot}{arccot}
\DeclareMathOperator{\arccsc}{arccsc}
\newcommand{\tuple}[1]{\left\langle#1\right\rangle}
\newcommand{\lt}{<}
\newcommand{\gt}{>}
\newcommand{\amp}{&}
\definecolor{fillinmathshade}{gray}{0.9}
\newcommand{\fillinmath}[1]{\mathchoice{\colorbox{fillinmathshade}{$\displaystyle \phantom{\,#1\,}$}}{\colorbox{fillinmathshade}{$\textstyle \phantom{\,#1\,}$}}{\colorbox{fillinmathshade}{$\scriptstyle \phantom{\,#1\,}$}}{\colorbox{fillinmathshade}{$\scriptscriptstyle\phantom{\,#1\,}$}}}
\)
Section 4.2 Approximating Definite Integrals (IN2)
Learning Outcomes
Approximate definite integrals using Riemann sums.
Subsection 4.2.1 Activities
Activity 4.2.1 .
Suppose that a person is taking a walk along a long straight path and walks at a constant rate of 3 miles per hour.
(a)
On the left-hand axes provided in
FigureΒ 65 , sketch a labeled graph of the velocity function
\(v(t) = 3\text{.}\)
Diagram Exploration Keyboard Controls
Key
Action
Enter, A
Activate keyboard driven exploration
B
Activate menu driven exploration
Escape
Leave exploration mode
Cursor down
Explore next lower level
Cursor up
Explore next upper level
Cursor right
Explore next element on level
Cursor left
Explore previous element on level
X
Toggle expert mode
W
Extra details if available
Space
Repeat speech
M
Activate step magnification
Comma
Activate direct magnification
N
Deactivate magnification
Z
Toggle subtitles
C
Cycle contrast settings
T
Monochrome colours
L
Toggle language (if available)
K
Kill current sound
Y
Stop sound output
O
Start and stop sonification
P
Repeat sonification output
Figure 65. At left, axes for plotting \(y = v(t)\text{;}\) at right, for plotting \(y = s(t)\text{.}\) Note that while the scale on the two sets of axes is the same, the units on the right-hand axes differ from those on the left. The right-hand axes will be used in question (d).
(b)
How far did the person travel during the two hours? How is this distance related to the area of a certain region under the graph of
\(y = v(t)\text{?}\)
(c)
Find an algebraic formula,
\(s(t)\text{,}\) for the position of the person at time
\(t\text{,}\) assuming that
\(s(0) = 0\text{.}\) Explain your thinking.
(d)
On the right-hand axes provided in
FigureΒ 65 , sketch a labeled graph of the position function
\(y = s(t)\text{.}\)
(e)
For what values of
\(t\) is the position function
\(s\) increasing? Explain why this is the case using relevant information about the velocity function
\(v\text{.}\)
Activity 4.2.2 .
Suppose that a person is walking in such a way that her velocity varies slightly according to the information given in the table and graph below.
\(t\)
\(v(t)\)
\(0.00\)
\(1.500\)
\(0.25\)
\(1.789\)
\(0.50\)
\(1.938\)
\(0.75\)
\(1.992\)
\(1.00\)
\(2.000\)
\(1.25\)
\(2.008\)
\(1.50\)
\(2.063\)
\(1.75\)
\(2.211\)
\(2.00\)
\(2.500\)
Diagram Exploration Keyboard Controls
Key
Action
Enter, A
Activate keyboard driven exploration
B
Activate menu driven exploration
Escape
Leave exploration mode
Cursor down
Explore next lower level
Cursor up
Explore next upper level
Cursor right
Explore next element on level
Cursor left
Explore previous element on level
X
Toggle expert mode
W
Extra details if available
Space
Repeat speech
M
Activate step magnification
Comma
Activate direct magnification
N
Deactivate magnification
Z
Toggle subtitles
C
Cycle contrast settings
T
Monochrome colours
L
Toggle language (if available)
K
Kill current sound
Y
Stop sound output
O
Start and stop sonification
P
Repeat sonification output
(a)
Using the grid, graph, and given data appropriately, estimate the distance traveled by the walker during the two hour interval from
\(t = 0\) to
\(t = 2\text{.}\) You should use time intervals of width
\(\Delta t = 0.5\text{,}\) choosing a way to use the function consistently to determine the height of each rectangle in order to approximate distance traveled.
(b)
How could you get a better approximation of the distance traveled on
\([0,2]\text{?}\) Explain, and then find this new estimate.
(c)
Now suppose that you know that
\(v\) is given by
\(v(t) = 0.5t^3-1.5t^2+1.5t+1.5\text{.}\) Remember that
\(v\) is the derivative of the walkerβs position function,
\(s\text{.}\) Find a formula for
\(s\) so that
\(s' = v\text{.}\)
(d)
Based on your work in (c), what is the value of
\(s(2) - s(0)\text{?}\) What is the meaning of this quantity?
Definition 4.2.3 .
If \(f(x)\) is a function defined on the interval \([a,b]\text{,}\) a Riemann sum for \(f\) on \([a,b]\) is a sum of the form
\begin{equation*}
\sum_{i=1}^{n} f(s_{i}) \cdot (x_i - x_{i-1})\text{,}
\end{equation*}
where \(a = x_0 \lt x_1 \lt \dots \lt x_{n-1} \lt x_n = b\) and where \(s_{i}\) is a point in the \(i\) -th subinterval.
Activity 4.2.5 .
Why is the Riemann sum in
DefinitionΒ 4.2.3 only
almost a sum of the areas of rectangles?
The function is not continuous.
The function is not differentiable.
Some of the values \(f(s_i)\) are negative.
The \(x\) -coordinates \(s_i\) are not equally spaced.
Solution .
Some of the values
\(f(s_i)\) are negative.
Diagram Exploration Keyboard Controls
Key
Action
Enter, A
Activate keyboard driven exploration
B
Activate menu driven exploration
Escape
Leave exploration mode
Cursor down
Explore next lower level
Cursor up
Explore next upper level
Cursor right
Explore next element on level
Cursor left
Explore previous element on level
X
Toggle expert mode
W
Extra details if available
Space
Repeat speech
M
Activate step magnification
Comma
Activate direct magnification
N
Deactivate magnification
Z
Toggle subtitles
C
Cycle contrast settings
T
Monochrome colours
L
Toggle language (if available)
K
Kill current sound
Y
Stop sound output
O
Start and stop sonification
P
Repeat sonification output
Figure 66. A generic Riemann sum.
Activity 4.2.6 .
Why is the Riemann sum in
FigureΒ 66 only
almost a sum of the areas of rectangles?
The subintervals have different widths.
The function is not differentiable.
Some of the values \(f(s_i)\) are negative.
The \(x\) -coordinates \(s_i\) are not equally spaced.
Solution .
Some of the values
\(f(s_i)\) are negative.
Activity 4.2.7 .
There are some special Riemann sums that are often easier to work with than the general Riemann sum of
DefinitionΒ 4.2.3 .
In a left Riemann sum , the point \(s_i\) in each subinterval is the left endpoint of the subinterval. That is,
\begin{equation*}
s_i = x_{i-1}\text{.}
\end{equation*}
Consider the left Riemann sum for
\(f(x) = x^{2/3}\) on the interval
\([2, 4]\) with 3 subintervals.
(a)
What are
\(a\) and
\(b\) in this case?
(b)
What is the value of
\(n\text{?}\)
(c)
What are the values of the
\(x_i\text{?}\)
(d)
What are the values of the
\(s_i\text{?}\)
(e)
What do you notice about the subinterval widths
\(x_{i} - x_{i-1}\text{?}\)
(f)
What is the value of the left Riemann sum?
Activity 4.2.8 .
The
right Riemann sum is similar to the left Riemann sum, but the point
\(s_i\) in each subinterval is the right endpoint of the subinterval instead of the left endpoint.
(a)
Repeat the tasks in
ActivityΒ 4.2.7 for the right sum, again with 3 subintervals on the interval
\([2, 4]\text{.}\)
Activity 4.2.9 .
The
midpoint Riemann sum is similar to the left and right Riemann sums, but the point
\(s_i\) in each subinterval is the midpoint of the subinterval.
(a)
What is the only thing that is different from
ActivityΒ 4.2.7 and
ActivityΒ 4.2.8 when computing the midpoint Riemann sum? Describe the difference precisely.
Solution .
The students should find the values of
\(s_i\) for the midpoint Riemann sum.
(b)
What is the value of this midpoint Riemann sum?
Activity 4.2.10 .
Explain how to approximate the area under the curve
\begin{equation*}
f(x) = \frac{1}{5} (x-4)(x-10)(x-12)
\end{equation*}
on the interval \([4,10]\) using a right Riemann sum with 3 subintervals.
Diagram Exploration Keyboard Controls
Key
Action
Enter, A
Activate keyboard driven exploration
B
Activate menu driven exploration
Escape
Leave exploration mode
Cursor down
Explore next lower level
Cursor up
Explore next upper level
Cursor right
Explore next element on level
Cursor left
Explore previous element on level
X
Toggle expert mode
W
Extra details if available
Space
Repeat speech
M
Activate step magnification
Comma
Activate direct magnification
N
Deactivate magnification
Z
Toggle subtitles
C
Cycle contrast settings
T
Monochrome colours
L
Toggle language (if available)
K
Kill current sound
Y
Stop sound output
O
Start and stop sonification
P
Repeat sonification output
The graph of the function
\(f(x) = 1/5 (x-4)(x-10)(x-12)\) crosses the
\(x\) -axis upward at
\((4,0)\) and downward at
\((10,0)\) with a maximum at about
\((6.3, 9.7)\text{.}\)
Subsection 4.2.2 Videos
Figure 67. Video for IN2
Subsection 4.2.3 Exercises